Gender and Age Differences in the Suppressive Effect of a 50 Hz Electric Field on the Immobilization-Induced Increase of Plasma Glucocorticoid in Mice

We developed an experimental system to characterize the suppressive effect of extremely low-frequency (ELF) electric fields (EFs) on the stress response. We assessed differences in the EF effects by age and gender. Control, EF-alone, immobilization-alone, and co-treated groups were subjected to an EF (50 Hz, 10 kV/m). Co-treated mice were exposed to the EF for 60 min, with immobilization during the latter half. Our results indicate that the suppressive effects of ELF EFs on the stress response in immobilized mice occur regardless of gender or age. As stress plays an important role in the onset and progression of various diseases, these findings may have broad implications for understanding the efficacy of EFs in animal, and perhaps human, health. Bioelectromagnetics. 2020;41:156–163. © 2019 Bioelectromagnetics Society.     

High frequency plant regeneration from thin cell layer explants of Brassica napus

Explants composed of the epidermis and 4–9 layers of subepidermal cells were excised from internodes of Brassica napus L. ssp. oleifera cv. Westar and cultured on modified Murashige and Skoog (MS) medium. The three or four terminal internodes excised from plants at an early stage (before any flower buds had opened) were shown to be the best explant source. Both cytokinin and auxin were required for induction of shoot organogenesis. Of six auxins tested, only naphthaleneacetic acid (NAA) was effective in shoot bud initiation. All four cytokinins tested (when associated with 0.5 mgl^-1 NAA) promoted organogenesis, but at differing frequencies. The highest shoot induction frequency was obtained at 10–15 mgl^-1 benzyladenine (BA). The organogenic response was strongly affected by the nitrogen content of the medium. The best response was observed when NO₃ ^- was the sole nitrogen source (supplied as KNO₃) in the range 30–90 mM. Sucrose and glucose were equally supportive in shoot regeneration with the optimal levels at 0.12 M and 0.15 M, respectively. Shoots were rooted on medium free of growth regulators and mature plants were grown in the greenhouse. Plants were also recovered from leafy structures which differed morphologically and histologically from shoot buds.     

Metal Halide Perovskite Materials for Solar Cells with Long‐Term Stability

Metal halide perovskite solar cells (PSCs) have emerged as promising candidates for photovoltaic technology with their power conversion efficiencies over 23%. For prototypical organic–inorganic metal halide perovskites, their intrinsic instability poses significant challenges to the commercialization of PSCs. Recently, the scientific community has done tremendous work in composition engineering to develop more robust light‐absorbing layers, including mixed‐ion hybrid perovskites, low‐dimensional hybrid perovskites, and all‐inorganic perovskites. This review provides an overview of the impact of these perovskites on the efficiency and long‐term stability of PSCs.     

Compositional and Solvent Engineering in Dion–Jacobson 2D Perovskites Boosts Solar Cell Efficiency and Stability

Hybrid halide 2D perovskites deserve special attention because they exhibit superior environmental stability compared with their 3D analogs. The closer interlayer distance discovered in 2D Dion–Jacobson (DJ) type of halide perovskites relative to 2D Ruddlesden–Popper (RP) perovskites implies better carrier charge transport and superior performance in solar cells. Here, the structure and properties of 2D DJ perovskites employing 3‐(aminomethyl)piperidinium (3AMP²⁺) as the spacing cation and a mixture of methylammonium (MA⁺) and formamidinium (FA⁺) cations in the perovskite cages are presented. Using single‐crystal X‐ray crystallography, it is found that the mixed‐cation (3AMP)(MA_0.75FA_0.25)₃Pb₄I₁₃ perovskite has a narrower bandgap, less distorted inorganic framework, and larger Pb? I? Pb angles than the single‐cation (3AMP)(MA)₃Pb₄I₁₃. Furthermore, the (3AMP)(MA_0.75FA_0.25)₃Pb₄I₁₃ films made by a solvent‐engineering method with a small amount of hydriodic acid have a much better film morphology and crystalline quality and more preferred perpendicular orientation. As a result, the (3AMP)(MA_0.75FA_0.25)₃Pb₄I₁₃‐based solar cells exhibit a champion power conversion efficiency of 12.04% with a high fill factor of 81.04% and a 50% average efficiency improvement compared to the pristine (3AMP)(MA)₃Pb₄I₁₃ cells. Most importantly, the 2D DJ 3AMP‐based perovskite films and devices show better air and light stability than the 2D RP butylammonium‐based perovskites and their 3D analogs.     

Inverse Optical Cavity Design for Ultrabroadband Light Absorption Beyond the Conventional Limit in Low‐Bandgap Nonfullerene Acceptor–Based Solar Cells

In the subwavelength regime, several nanophotonic configurations have been proposed to overcome the conventional light trapping or light absorption enhancement limit in solar cells also known as the Yablonovitch limit. It has been recently suggested that establishing such limit should rely on computational inverse electromagnetic design instead of the traditional approach combining intuition and a priori known physical effect. In the present work, by applying an inverse full wave vector electromagnetic computational approach, a 1D nanostructured optical cavity with a new resonance configuration is designed that provides an ultrabroadband (≈450 nm) light absorption enhancement when applied to a 107 nm thick active layer organic solar cell based on a low‐bandgap (1.32 eV) nonfullerene acceptor. It is demonstrated computationally and experimentally that the absorption enhancement provided by such a cavity surpasses the conventional limit resulting from an ergodic optical geometry by a 7% average over a 450 nm band and by more than 20% in the NIR. In such a cavity configuration the solar cells exhibit a maximum power conversion efficiency above 14%, corresponding to the highest ever measured for devices based on the specific nonfullerene acceptor used.     

Low‐Temperature Growth of Hard Carbon with Graphite Crystal for Sodium‐Ion Storage with High Initial Coulombic Efficiency: A General Method

Practical application of hard carbon materials in sodium‐ion batteries (SIBs) is largely limited by their low initial coulombic efficiency (ICE), which may be improved by increasing the graphitization degree. However, biomass‐derived hard carbon is usually nongraphitizable and extremely difficult to graphitize by direct heating even at 3000 °C. Herein, a general strategy is reported for fabricating hard carbon materials with graphite crystals at 1300 °C promoted by external graphite that serves as a crystal template for the growth of graphite crystals. The graphite crystals enable the contacted pseudographitic domains with a high‐level ordered structure, large domain size, and low defects, leading to an enhanced ICE. The obtained hard carbon materials with graphite crystals, using the carbonized eggshell membranes, and sucrose‐derived microsphere as precursors, achieve very high ICE of 89% and 91% with reversible capacity of 310 and 301 mA h g^?1, respectively. Therefore, using external graphite to promote high‐level ordering pseudographitic domains at low temperature is quite useful to improve ICE for SIB applications.     

Surface Engineering of 3D Gas Diffusion Electrodes for High‐Performance H2 Production with Nonprecious Metal Catalysts

In this work, a methodology is demonstrated to engineer gas diffusion electrodes for nonprecious metal catalysts. Highly active transition metal phosphides are prepared on carbon‐based gas diffusion electrodes with low catalyst loadings by modifying the O/C ratio at the surface of the electrode. These nonprecious metal catalysts yield extraordinary performance as measured by low overpotentials (51 mV at ?10 mA cm^?2), unprecedented mass activities (>800 A g^?1 at 100 mV overpotential), high turnover frequencies (6.96 H₂ s^?1 at 100 mV overpotential), and high durability for a precious metal‐free catalyst in acidic media. It is found that a high O/C ratio induces a more hydrophilic surface directly impacting the morphology of the CoP catalyst. The improved hydrophilicity, stemming from introduced oxyl groups on the carbon electrode, creates an electrode surface that yields a well‐distributed growth of cobalt electrodeposits and thus a well‐dispersed catalyst layer with high surface area upon phosphidation. This report demonstrates the high‐performance achievable by CoP at low loadings which facilitates further cost reduction, an important part of enabling the large‐scale commercialization of non‐platinum group metal catalysts. The fabrication strategies described herein offer a pathway to lower catalyst loading while achieving high efficiency and promising stability on a 3D electrode.     

紫花苜蓿F-box蛋白基因MsFTL的克隆及功能分析

FTL(F-box Triple LRR protein)是F-box蛋白家族的成员,具有F-box保守结构域,在植物抵御逆境胁迫过程中起重要作用。本研究参考低温胁迫下紫花苜蓿转录组数据设计引物,通过RT-PCR克隆获得紫花苜蓿MsFTL基因,该基因的全长1422 bp,编码473个氨基酸。该蛋白含有1个F-box结构域及3个LRR重复。系统进化分析表明,MsFTL与蒺藜苜蓿XP_003626345.1 F-box/FBD/LRR-repeat protein亲缘关系最近。两者蛋白序列比对发现共有11个差异位点。在低温、盐、干旱以及外源ABA处理下,MsFTL基因受到诱导,表达量上调。构建植物过表达载体pCBM-MsFTL,通过农杆菌介导法转化烟草。对经过抗性筛选、PCR和Real-time PCR验证的转基因植株进行低温抗性鉴定。在-4℃低温胁迫下,野生型烟草叶片出现了明显的萎蔫失水现象,而转基因烟草萎蔫程度相对较轻。生理检测结果表明,4℃处理24 h之后,转基因烟草的可溶性蛋白含量、可溶性糖含量、SOD活性,CAT活性高于野生型,MDA含量低于野生型。本研究表明,MsFTL基因在提高植物对低温胁迫的抗性方面具有重要的作用。     

双侧股神经阻滞用于双膝关节置换术患者的麻醉效果和对血清炎性因子水平的影响

目的:研究双侧股神经阻滞术用于双膝关节置换术患者麻醉效果和对患者血清炎性因子水平的影响。方法:选择2015年10月～2018年10月在我院进行双膝关节置换术的110例患者,按照其入院顺序经随机数字表法分为两组,每组55例。对照组采用全身麻醉,研究组采用双侧股神经阻滞联合全身麻醉。比较两组的麻醉情况,治疗前后血清炎性因子白介素6(IL-6)、C反应蛋白(CRP)、舒张压(DBP)、收缩压(SBP)、心率(HR)水平的变化。结果:两组麻醉时间比较差异无统计学意义(P0.05);研究组拔管、恢复室停留和苏醒时间均显著短于对照组(P0.05)。两组术后24 h、48 h血清炎性因子IL-6、CRP水平均高于术前,但研究组以上指标均显著低于对照组(P0.05);两组术中DBP、SBP、HR水平均较术前显著降低(P0.05),但研究组DBP、SBP、HR水平均显著高于对照组(P0.05),两组术后DBP、SBP、HR水平比较差异均无统计学意义(P0.05)。结论:与单纯采用全身麻醉相比,双侧股神经阻滞可有效改善双膝关节置换术患者的麻醉效果,并降低其血清炎症因子和稳定其血流动力学。     

An Efficient Separator with Low Li‐Ion Diffusion Energy Barrier Resolving Feeble Conductivity for Practical Lithium–Sulfur Batteries

Due to unprecedented features including high‐energy density, low cost, and light weight, lithium–sulfur batteries have been proposed as a promising successor of lithium‐ion batteries. However, unresolved detrimental low Li‐ion transport rates in traditional carbon materials lead to large energy barrier in high sulfur loading batteries, which prevents the lithium–sulfur batteries from commercialization. In this report, to overcome the challenge of increasing both the cycling stability and areal capacity, a metallic oxide composite (NiCo₂O₄@rGO) is designed to enable a robust separator with low energy barrier for Li‐ion diffusion and simultaneously provide abundant active sites for the catalytic conversion of the polar polysulfides. With a high sulfur‐loading of 6 mg cm^?2 and low sulfur/electrolyte ratio of 10, the assembled batteries deliver an initial capacity of 5.04 mAh cm^?2 as well as capacity retention of 92% after 400 cycles. The metallic oxide composite NiCo₂O₄@rGO/PP separator with low Li‐ion diffusion energy barrier opens up the opportunity for lithium–sulfur batteries to achieve long‐cycle, cost‐effective operation toward wide applications in electric vehicles and electronic devices.